Ronbow Drawer Bridge (632112-15) - Manual

RONBOW CORP INSTALLATION GUIDE ronbow.com
INSTALLATION SHEET
VENUS CABINET MODEL: 632112
632115
DRAWER BRIDGE
12" / 15”
STEP 1: Mark 4 spots for pilot holes
inside Venus cabinet.
See Figure 1.
NOTE: For installing drawer bridge with Venus cabinet.
Figure 1.
STEP 2: Attach drawer bridge to
cabinet and secure screws.
See Figure 2.
Figure 2.
MATERIALS NEEDED:
(4) GALVANIZED SCREWS - 1¼”
DRILL
PHILIP SCREWDRIVER
NOTE: Make sure to align drawer
bridge to cabinet and measurements
are correct before drilling.