Ronbow Motion Sensor LED Light - Manual

RONBOW CORP INSTALLATION GUIDE ronbow.com
INSTALLATION SHEET
MOTION SENSOR LED LIGHT
ACCESSORIES MODEL: 710024-NF
710030-NF
Motion sensor LED light upgrade is available for the Ariella, Vanessa, Jenna and Chloe collections.
It is recommended to have an available wall outlet near the cabinet. It may be located either on the back wall or
underneath the cabinet.
SpECIfICAtIonS:
• Input voltage: DC12V
• Driving power: <36W
• LED strip: Light temperature: 4200K
MotIon SEnSoR:
• When the drawer opens the LED light turns on. When the drawer closes the LED light turns off.
• Input wire length: 3-1/4 feet
• Output wire length: 1 foot
notE:
• Working environment temperature should be -5°C~40°C.
• This LED is not water proof. Avoid direct contact with water.
• Motion sensor is sensitive to direct sunlight. Avoid placing motion sensor in extreme temperature or direct light.
Failing to do so may result in damage to the sensor technology.
Infrared Motion Sensor LED Strip
DC Out DC IN 6’
Output: 1 foot
Input: 3-1/4 feet