Power Jacks M-Series - Manual

[email protected]
www.powerjacks.com
C-SerieS
– Metric, Cubic Design
– Machine Screw Jack
– Capacities 10kN to 100kN
– Translating & Rotating Screw
configurations
– Anti-backlash & anti-rotation
(keyed) options
– 6 mounting options including
trunnion
e-SerieS
– Metric, Single Face Design
– Machine Screw or Ball Screw
– Capacities 5kN to 3500kN
– Translating & Rotating Screw in
Upright & Inverted types
– Stainless Steel Option
– Anti-backlash & anti-rotation
(keyed) options
– 6 mounting options including
trunnion & double clevis
– Special custom design
M-SerieS
– Imperial (inch / lb), Single Face
– Machine Screw or Ball Screw
– Capacities 0.25 Ton to 250 Ton
– Translating & Rotating Screw in
Upright & inverted types
– Stainless Steel Option
– Anti-backlash & anti-rotation
(keyed) options
– 6 mounting options including
trunnion & double clevis
– Special custom design
S-SerieS
– Metric, Cubic Design
– High Performance Machine
Screw Jack
– 50% greater duty cycle than
standard worm gear machine
screw jack
– Capacities 25kN to 200kN
– Translating & Rotating Screw
Configurations
– Thermally Optimised Gearbox
– Other Options as C-Series
– Special Custom Designs
Bevel Gearboxes
range-n
The Neeter Drive bevel gearbox is an ultra compact unit and
is available in 5 sizes with 5 gear ratios. Employing a central
bearing housing support on the 1:1 and 1.5:1 gear ratios, and a
small extended bearing housing on the input side of the bevel
gearboxes with ratios 2:1 and above.
The standard design is suitable for most applications
but we can customise units to meet the most
arduous of conditions - whether inside,
outside, on land or subsea.
Screw Jacks
As a leader in the manufacture of mechanical screw jacks, and
with over two million products in the field, we guarantee quality,
reliability, performance and value.
Our screw jacks come in a variety of series designed to meet
the challenges of any application.
They range from the classic single face screw jack, one of
the most widely used and popular screw jacks worldwide and
proven in the most demanding linear motion applications, to
our high performance machine screw jack that meet the ever-
growing industrial demands placed upon our products.
– Ultra Compact
Bevel Gearbox Design
– 2-way, 3-way & 4-way
Configurations
– Solid Shaft & Hollow Shaft
– Gear Ratios: 1:1, 1.5:1, 2:1, 3:1
& 4:1
– Torque Ratings up to 3000 Nm
– Robust SG Iron Housing as
Standard.
– Special Custom Design
– Special Gear Ratios
– Popular models ex-stock