Red Lion PMK8 - Manual

PMK8 DIMENSIONS In inches (mm)
The PMK8 panel mount adapter kit is used to mount a PAX meter into an
existing GEMINI panel cut-out. The kit includes two durable steel mounting
plates painted black and a neoprene gasket. The Adapter Kit, when used with a
meter which has NEMA 4/IP65 specifications, will meet NEMA 4/IP65
requirements when properly installed.
MODEL PMK8 - PANEL MOUNT ADAPTER KIT FOR PAX TO GEMINI CUT-OUT
ORDERING INFORMATION
Bulletin No. PMK8-X
Drawing No. LP0559
Effective 12/02
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion-controls.com
MODEL NO. DESCRIPTION PART NUMBER
PMK8 Panel Mount Adapter Kit (PAX to Gemini) PMK80000
MOUNTING PLATE ADAPTER PLATE
PMK8 INSTALLATION
1. Apply the panel gasket (provided with the meter) over the PAX meter.
2. Insert the PAX meter through the mounting plate.
3. Apply the panel gasket (provided with the adapter kit) over the
PAX meter behind the mounting plate.
4. Insert the PAX meter with mounting plate and gaskets into the
front of the existing Gemini hole cut-out. Slide the adapter
plate over the rear of the PAX meter.
5. Slide the panel latch (provided with the meter) over the
rear of the PAX meter and tighten the screws.