Resetting the unit, Essed, P.151) – Kenwood DNN9250DAB User Manual
Page 152: Resetting the unit (p.151)
Advertising
151
Resetting the Unit
If the unit or the connected device fails to operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
HOME
6
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see
• When the unit is turned on after resetting, the Initial SETUP screen appears. See
.
Advertising
This manual is related to the following products: