Bodyline Products International 216FD-V - Manual (Page 29)

29 AXIS 216FD/FD-V/MFD/MFD-V - Live View Config
Check the Show viewer toolbar box to display e.g. the AXIS Media Control (AMC) or the
QuickTime viewer toolbar under the video image in your browser.
AMC Settings
The administrator can disable the installation of the MPEG-4 decoder included with AMC.
This is used to prevent the installation of unlicensed copies. Further decoder licenses can
be purchased from your Axis dealer.
HTML Examples
You can add live video from the AXIS 216FD/FD-V/MFD/MFD-V to your own web site.
The camera can transmit a Motion JPEG stream to up to 20 simultaneous connections,
although an administrator can restrict this to fewer. If MPEG-4 is set as video format,
multicasting is used and the video stream will be available for an unlimited number of
viewers connected to the parts of the network where multicast is enabled. Please note that
a separate MPEG-4 license is required for each viewer.
Select the preferred Video Format from the drop down list. The available options are
Motion JPEG, MPEG-4 using AMC and MPEG-4 using QuickTime.
The Motion JPEG selection has additional settings for Image Type, Image size and other
optional settings to configure the video stream to suit your Web page.
Click Update once satisfied.
The camera generates the required source code for your configuration. Copy this code and
paste it into your own Web page code.
External Video
The AXIS 216FD/FD-V/MFD/MFD-V can also display video images from other Axis
network cameras and video servers, directly on the Live View page. These are known as
External Video sources. Once configured, these external video sources are available from
the drop-down list on the Live View page.
Click the Add button to open the External Video Source Setup dialog, which is used to
make all the necessary settings. Enter the IP address or host name of the external video
source you wish to add. Depending on the external source, select either MPEG-2, MPEG-4
or Motion JPEG as the type of video stream to receive.
Sequence Mode
The Live View page can be configured to rotate through the internal and selected external
video sources, in order, or randomly. Select the desired video sources and enter the time in
seconds to display each source (up to 59 minutes). Click Save.
The Sequence buttons will appear on the Live View page to enable the viewer to start and
stop the sequence mode.