Bodyline Products International 216FD-V - Manual (Page 34)

34 AXIS 216FD/FD-V/MFD/MFD-V - Event Configuration
Please see the online help for descriptions of each available option.
High level Only very large objects
trigger motion detection An object that appears in the region will
trigger the motion detection for a long
period Ordinary colored objects on ordinary
backgrounds will trigger the motion
detection
Low level Even very small objects
trigger motion detection An object that appears in the region will
trigger motion detection for only a very
short period Only very bright objects on a dark back-
ground will trigger motion detection
Default value Low Medium to High Medium to High
Examples:
• Avoid triggering on small objects in the video image by setting the object size level to high.
• To reduce the number of triggers if there is a lot of movement during a short period of time, select a high
history level.
• To only detect flashing light, low sensitivity can be selected. In other cases, a high sensitivity level is
recommended.
Port Status
Under Event Configuration > Port Status there is a list showing the status for the camera’s
input and output. This is for the benefit of Operators, who have no access to the System
Options section.
Example:
If the Normal state for a push button connected to an input is set to Open circuit - as long as the but-
ton is not pushed, the state is inactive. If the button is pushed, the state of the input changes to active.
Object Size History Sensitivity