Led indicators – Bodyline Products International 216FD-V User Manual
Page 9
9
AXIS 216FD/FD-V/MFD/MFD-V - Product overview
Audio out- Audio output (line level), which can be connected to a public address (PA)
system or an active speaker with a built-in amplifier. A pair of headphones can also be
attached. A stereo connector must be used for the audio out.
Audio in - One 3.5mm input for a mono microphone, or for line-in mono signal (left
channel is used from a stereo signal).
Serial Number Label - The serial number may be required during installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service,
or to restore the factory default settings, as described in Resetting to the Factory Default
LED indicators
Network
Green
Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber
Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit
No connection.
Status
Green
Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation,
or to flash only when the camera is accessed. See the online help files for
more information. Go to
Setup > System Options > LED settings
Amber
Steady during startup, reset to factory default or when restoring settings.
Red
Slow flash for failed upgrade.
Power
Green
Normal operation.
Amber
Flashes green/amber during firmware upgrade.
LED
Color
Description