Horner APG RCS RCS250 User Manual

Horner APG Sensors

Advertising
background image










For more information on the RCS116, refer to the OCS LX Series Hardware Manual (MAN0755).

For more information on the RCS210 / RCS250, refer to the Control Station Hardware Manual
(MAN0227).

1

SPECIFICATIONS

Table 1 – Specifications for RCS116 / 210RCS210 / RCS250

Humidity

5% to 95% non-condensing

Primary Power Range*

10-30VDC

Ladder Execution

Typical Execution Speed

0.7 ms. per 1K of boolean logic.

Ladder Capacity

RCS116: 16Kbytes
RCS210: 64Kbytes

RCS250: 128KBytes

CAN Power Range

12 – 25 VDC

CAN Power Current

75mA maximum

Primary Serial

Standard 9 pin RS-232 for programming, monitoring, and network
administration. Modbus/RTU Master, Slave, ASCII Send and Receive,
and CsCAN Serial also supported.

CAN Network

CsCAN Network / DeviceNet Slave

Input / Output

Local (All Modules): Maximum of four (4) SmartStack Modules per OCS

Remote (OCS110 / 210/ 250 / or RCS250 Modules):
In addition to 4 local I/O modules, up to 20 remote SmartStack I/O
Modules can be connected to an OCS or RCS using five Fiber Optic
Bases, which each contain four I/O slots.

UL
CE

Please refer to Compliance Table located at

http://www.heapg.com/Support/compliance

.htm

Operating Temperature

0

°

C to +60

°

C

Typical Power Draw *

150mA @ 24VDC

Inrush Current *

1A @ 24VDC for 8mS

Height

7.00” (177.8 mm)

Width

1.75“ (44.45 mm)

Mounting Depth

4.00” (101.60 mm)

Keypad

Although the RCS does not have a local operator interface, it supports a
remote operator interface through a PC connected to the RCS unit’s built-
in network. 32-Key (Remote Only)

Display

Although the RCS does not have local display, it supports a remote
operator interface through a PC connected to the RCS unit’s built-in
network.

* These specifications are for RCS products without any SmartStack I/O Modules attached. The
specifications for the SmartStack Modules can be found in the applicable SmartStack Data Sheets.

15 JAN 2010

MAN0432-04

Remote Control Station

HE800RCS116

/

HE800RCS210 / RCS250

Products Specifications

and Installation Data

Advertising
This manual is related to the following products: