Aastra Telecom AASTRA 9112 I - Manual (Page 52)

New Features in 1.4.1
48 41-001024-00, Rev 09, Release 1.4.1
IP Phone Release Notes 1.4.1
9112i/9133i Only
Addition of DisplayName1 & DisplayName2 (now also applies to 9112i/
9133i)
The 9112i/9133i IP phones now support the use of displayName1 and
displayName2. The value in these fields display on the idle screen of the IP
phone. Previous IP phone releases supported these parameters on the
480i/480i CT only.
You can configure these parameters via the configuration files or the Aastra Web
UI.
Configuring via the Configuration Files
You use the following parameters in the configuration files to configure
displayName1 & displayName2.)
Parameter –
displayName1
Idle Display Name 1
(in Web UI)
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <mac>.cfg
Description The name displayed on the idle screen rather than the screen name and
phone number
Format Alphanumeric characters
Default Value Not Applicable
Range For 480i/480i CT:
Up to 21 characters (width of LCD)
For 9112i/9133i:
Up to 16 characters (width of LCD)
Example displayName1: SIPphone1