A. preparations before ironing, B. setting the temperature, Preparations before ironing – Siemens TS45450 User Manual

Page 18: Setting the temperature

Advertising
background image

18

SIEMENS

EN

gl

ISH

a

preparations before

ironing

For the details of the following actions, please see

the related chapters of this user manual.

1. Release the iron from its fixation system (10) by

pulling the lever located at the heel of the iron

backwards.

2. Remove any label or protective covering from the

soleplate (16).

3. Place the appliance horizontally on a solid, stable

surface. You may remove the iron pad (2) from

the appliance and place the iron on it on another

solid, stable, horizontal surface.

4. Fill the removable water tank (1). If the tank is

removed, three beeps may be heard.

5. Unwind the mains cable (5) fully, and plug it into

an earthed socket.

6. Set the main power button (9) to the on position

(illuminated in red).

7. The temperature and steam level automatic

selection function will be selected by default.

This allows you to start ironing without selecting

the steam or temperature levels.

If needed, select your preferred setting manually

by touching the tactile icons on the display (8).

The selected temperature and steam icons will

stop flashing after a time, indicating that the

appliance is ready to use.

remark:

The steam generator will take more time to generate

steam only on initial heating up, or after performing

the de-scaling operation (calc´n´Clean).

When water is already present in the steam

generator during regular use, heat up time to reach

the operating temperature will be faster.

8. This appliance has a built-in water level sensor

which shows when the water tank (1) must be

filled.

The

icon will flash when the water tank is

empty (three beeps may be heard).

Important:

• Normal tap water can be used.

To prolong the optimum steam function, mix tap

water with distilled water 1:1. If the tap water

in your district is very hard, mix tap water with

distilled water 1:2.

You can inquire about the water hardness with

your local water supplier.

• The water tank (1) can be filled at any time while

using the appliance.

• To avoid damage and/or contamination of the

water tank and the boiler, do not put perfume,

vinegar, starch, descaling agents, additives or any

other type of chemical product into the water tank.

any damage caused by the use of the

aforementioned products, will make the

guarantee void.

• Do not use condensation water from tumble

dryers, air conditioning systems or similar. This

appliance has been designed to use normal tap

water.

• The iron is not designed to rest on its heel.

Please always position it horizontally on the iron

pad (2).

• The iron pad can be placed into the specially

designed recess on the appliance or somewhere

suitable alongside the ironing area.

Never rest the iron on the appliance without

the iron pad!

• During its first use the iron may produce certain

vapours and odours, along with white particles on

the soleplate, this is normal and will stop after a

few minutes.

• While the steam release button is pressed, the

water tank may produce a pumping sound, this is

normal, indicating that water is being pumped to

the steam tank.

B

Setting the

temperature

By default, the steam station automatically chooses

the “i-Temp” temperature setting. If necessary, the

temperature setting may be modified and adapted to

your needs.

1. Check the ironing instruction label on the garment

to determine the correct ironing temperature.

2. Select the required ironing temperature setting:

Temperature icon on

display

Suitable for:

any type of fabric which

can be ironed.
dark and delicate

fabrics. Reduces the

risk of shiny marks.
synthetics.
silk – wool.
cotton – linen.

3. The selected temperature icon will flash while the

soleplate (16) is heating and will stop flashing as

soon as the soleplate has reached the selected

temperature.

Tips:

• Sort your garments out based on their cleaning

symbol labels, always starting with clothes that

have to be ironed at the lowest temperatures.

• If you are not sure what the garment is made

of then begin ironing at a low temperature and

decide on the correct temperature by ironing a

small section not usually seen when worn.

Advertising
This manual is related to the following products: