Apollo 65 - Manual (Page 120)

4. Press ENTER when you have finished entering the
waypoint information.
HOME USER
44°24.29N Rwlen
122°51.52W 3000’
Create User
Waypoint by
Radial/Distance
A User waypoint may also be created where its
position is referenced by a Radial and Distance from
another waypoint.
1. Press the DB soft key. Turn the LARGE knob to view
the “Create User Wpt By Rad/Dis” page, and then
press
ENTER .
Create User Wpt
by Radial/Dist
Press ENT
2. The first character of the radial will flash.
Ref Wpt: AAF
000.0° 000.0nm
3. Select the Reference Waypoint. Turn the LARGE
knob ccw one click to select the waypoint identifier
which will be replaced by the change prompt
(Chg?). Press
ENTER to change the waypoint
identifier.
Ref Wpt: Chg?
000.0° 000.0nm
4. Turn the SMALL knob to select the desired
waypoint type. Only Airports, NDBs, and VORs
may be used as reference points. Turn the
LARGE
knob clockwise one click to move to the first
character of the identifier. Turn the
SMALL knob to
select the desired character. Use the LARGE and
5-10
Waypoint Database
ENTER
ENTER
DB
ENTER