LBL Lighting MO Direct Feed Standoff - Manual

1
Install the Standoff
ANCHOR
WALL
Mark the standoff location points onto the wall.
Tap the anchor at the marked point into the wall up to the
threaded portion with a hammer.
Screw the anchor in the rest of the way with a Phillips
screwdriver.
Installation Instructions for
Wall Monorail Standoff 1.0 HANGERDIRW_
980WMSTND
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
This product must be used with LBL Lighting Wall MonoRail system
only.
Use standoffs every three feet of Wall MonoRail run, at the corners
and where the two rails join together.
Wall Monorail
1A
1
2
3
1B
3
2