Chatsworth Products Wall-Mount Enclosed Systems User Manual

Wall-mount systems

Advertising
background image

For small networks, provides 6
rack-mount spaces for up to
150 lb of equipment. Equipment
attaches to the top of the
bracket and hangs parallel to
the surface of the wall.
Bracket projects 12-1/4" from
the wall and is only 6-1/8" high.
All-alumunim construction,
unassembled.

Use Fixed Wall-Mount Rack when
equipment weight exceeds the
load bearing capacity of a CPI
Swing Gate Rack. Fixed Wall-
Mount Rack is available in three
heights and three depths. Support
up to 200 lb. Heavy-duty model
supports up to 350 lb. Most rack
shelves can be used with the Fixed
Wall-Mount Rack.

Select sizes of the Fixed Wall-
Mount Rack are available with
an enclosure to provide added
physical security for equipment.
Enclosures feature a locking
door and vented top and bottom
panels. A fan kit can be added
to increase air changes. The
enclosure can be removed
when servicing equipment.

Ideal for supporting a few
patch panels in a small office.
Hinged Panel Mounting
Bracket provides easy
access to rear of equipment
(as with Swing Gate Rack).
The bracket mounts to the
wall; panels pivot open on the
included hinges. Attach
cables to the tie points at the
top and bottom of the brack-
et. The bracket is available in
10 sizes (five heights, two
depths) and supports up to 30
lb of 19” EIA equipment.

Standard Swing Gate Wall
Rack pivots open to the right
or left to provide easy
access to the rear of equip-
ment and is ideal for storing
the mix of patch panels and
equipment typical in most
small telecommunications
rooms. Available in four
heights and three depths,
including a 25" deep version,
Standard Swing Gate Wall
Rack will support up to 100 lb
of equipment, up
to 150 lb with an auxiliary
bracing kit.

If you need strength, physical
security and utility, Cube-iT Plus
Wall Cabinet is the answer.
Cube-iT is a series of wall-mount-
ed and floor-supported telecom-
munications enclosures designed
to secure equipment for a cross
connect. The wall-mount Cube-iT
will support up to 200 lb of equip-
ment and the floor-supported
Cube-iT will support up to 1000 lb
of equipment. The cabinets are
copper and fiber ready, and feature
easy access to the front and rear of
the cabinet. Available in five
heights and four depths and ships
fully assembled with mounting
hardware.

Organize.
Store.
Secure.

SM

Wall-Mount Systems

Extra Capacity Wall Bracket

Fixed Wall-Mount Rack

Wall-Mount Rack Enclosure

Hinged Panel Mounting Bracket

Standard Swing Gate Wall Rack

Cube-iT PLUS Cabinet System

Advertising
This manual is related to the following products: