Campbell Scientific RF401A-Series Spread Spectrum Radios User Manual
Instruction manual, Rf401a-series spread spectrum radios
Advertising
Table of contents
Document Outline
- Revision and Copyright Information
- Limited Warranty
- Assistance
- Precautions
- Table of Contents
- 1. Introduction
- 2. Cautionary Statements
- 3. Initial Inspection
- 4. Quickstart
- 5. Overview
- 6. Specifications
- 7. Product Description
- 8. Configuring the RF401A Series
- 9. LoggerNet Setup
- 10. Installation Best Practices
- 11. Operation
- 11.1 Main
- 11.2 PakBus®
- 11.3 Advanced
- 11.3.1 Serial Number
- 11.3.2 Operating System Version
- 11.3.3 Radio Firmware Version
- 11.3.4 Received Signal Strength
- 11.3.5 Retransmit Failures
- 11.3.6 ME Baud Rate
- 11.3.7 RS-232 Parity
- 11.3.8 RS-232 Stop Bits
- 11.3.9 RS-232 Character Length
- 11.3.10 RS-232 Auto Power Down
- 11.3.11 AT Sequence Character
- 11.3.12 Silence Time Before Command Sequence
- 11.3.13 Silence Time After Command Sequence
- 11.3.14 AT Command Mode Timeout
- 11.3.15 Net Address Mask
- 11.3.16 Radio Address Mask
- 12. Attribution
- Appendix A. Part 15 FCC Compliance Warning
- Appendix B. Distance vs. Antenna Gain, Terrain, and Other Factors
- Campbell Scientific Companies