Setting the channels, Storing channels automatically, Storing channels manually – Samsung LE26R71B User Manual
Page 10
English-8
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the menu button to display the menu.
Press the or button to select “Channel”, then press the
enter button.
2. Press the or button to select “Manual Store”, then press the
enter button.
3. Press the
enter button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the or button
and then press the
enter button.
You can also set a programme number by pressing number buttons on the remote control.
Storing Channels manually
- Storing Channels automatically
- Storing Channels manually
If you want to reset this feature...
1. Press the menu button to display the menu.
Press the or button to select “Setup”, then press the
enter button.
2. Press the
enter button again, to select “Plug & Play”.
3. The message to “Start Plug & Play” is displayed.
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the menu button to display the menu.
Press the or button to select “Channel”, then press the
enter button.
2. Press the enter button to select “Country”.
3. Select the appropriate country by pressing the or button.
Press the
enter button to confirm your choice.
4. Press the or button to select “Auto Store”, then press the
enter
button.
5. Press the enter button.
The TV will begin memorizing all of the available channels.
Press the
enter
button at any time to interrupt the memorization process and return to the “Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
Storing Channels automatically
BN68-00983A-01Eng.indd 8
2006-02-02 ¿АИД 2:57:03