Changing the picture size, Freezing the current picture, Digital noise reduction – Samsung LE26R71B User Manual

Page 15

Advertising
background image

English-3

auto Wide: Automatically adjusts the picture size to the "6:9" aspect ratio.

16:9: Adjusts the picture size to 6:9 appropriate for DVDs or wide broadcasting.

Zoom: Magnifies the 6:9 wide picture (in the vertical direction) to fit the screen size.

4:3: This is the default setting for a video movie or normal broadcasting.

You can select the picture size which best corresponds to your

viewing requirements.
1. Press the menu button to display the menu. Press the  or  button to

select “Picture”, then press the

enter button.

2. Press the  or  button to select “Size”, then press

the

enter button.

3. Select the required option by pressing the  or  button.

Press the

enter button.

4. Press the exit button to exit.

Changing the Picture Size

You can select these options
by simply pressing the

P.SiZe

button on the remote control.

“Auto Wide” function is available only in "TV", "Ext", "Ext2", "AV", and "S-Video" mode.

In PC Mode, only “6:9” and “4:3” mode can be adjusted.
Select by pressing the  or  buttons. Use the  or  button to move the

picture up and down. After selecting , use the  or  button to magnify or reduce
the picture size in the vertical direction.

When the main picture is PC, the
sub picture only supports “TV”,

“Ext.”, “Ext.2”, “AV” and “S-Video”. The
sub
picture does not support other input
sources in this case.

You may notice that the picture in

the PIP window becomes slightly

unnatural when you use the main screen
to view a game or karaoke.

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number  to 4 on page 2.

2. Press the  or  button to select “Reset”, then press the

enter button.

3. Press the exit button to exit.

The “Reset” will be set for each picture mode.

resetting the Picture Settings to the Factory defaults

Press the STILL button to freeze a moving picture into a still one.

Press again to cancel.

This function will automatically cancel 5 minutes later.

Freezing the Current Picture

If the broadcast signal received by your TV is weak, you can activate the

Digital Noise Reduction feature to help reduce any static and ghosting

that may appear on the screen.
1. Press the menu button to display the menu. Press the  or  button to

select “Picture”, then press the

enter button.

2. Press the  or  button to select “Digital NR”, then press the

enter button.

3. Press the  or  button to select “On” or “Off”. Press the

enter button.

4. Press the exit button to exit.

digital noise reduction

BN68-00983A-01Eng.indd 13

2006-02-02 ¿АИД 2:57:08

Advertising
This manual is related to the following products: