Samsung LE26R71B - Manual (Page 16)

English-4
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching
the main picture.
1. Press the menu button to display the menu. Press the  or  button to
select “Picture”, then press the enter button.
2. Press the  or  button to select “PIP”, then press the enter button.
3. Press the enter button again.
Press the  or  button to select “On”, then press enter button.
If the PIP is activated, the size of the main picture turns to “6:9”.
4. Press the  or  button to select “Source”,
then press enter button. Select a source of the sub picture by
pressing the  or  button and press the enter button.
The sub picture can serve different source selections based on what the main picture is set to.
5. Press the  or  button to select “Swap”.
To interchange the main picture and the sub picture, select “Swap” option
and press the enter button.
The main picture and the sub picture are interchanged.
If main picture is in “PC” mode, “Swap” is not available.
6. Press the  or  button to select “Size” of the sub picture and then
press the enter button. Select a size of the sub picture by
pressing the  or  button and then press the enter button.
If main picture is in “PC” mode, “Size” is not available.
7. Press the  or  button to select “Position”, then press the enter
button. Select the position of the sub picture by pressing the  or 
button and then press the enter button.
Viewing the Picture in Picture (PiP)
Press the PiP button on the
remote control repeatedly to
activate or deactivate the “PIP”.
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm
gives viewers brighter and clearer images. DNIe technology will match
every signal to your eyes. You can see how DNIe improves the picture by
setting DNIe Demo mode to On.
1. Press the menu button to display the menu. Press the  or  button to
select “Picture”, then press the enter button.
2. Press the  or  button to select “DNIe Demo”, then press the
enter button.
3. Press the  or  button to select “On” or “Off”. Press the enter button.
4. Press the exit button to exit.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and
DNIe pictures.
By default, the product displays the picture with DNle applied.
dnie demo (digital natural image engine)
BN68-00983A-01Eng.indd 14 2006-02-02 ¿АИД 2:57:09