Samsung LE32A431T2 - Manual (Page 31)

English - 9
Setting up the tV with your PC
Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ENtER button, to select "Picture".
. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
. When you are satisfied with your setting, press the
ENtER button.
. Press the EXIt button to exit.
♦ Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the tOOLS button on the remote control.
. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the ENtER button.
♦ Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the ENtER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENtER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENtER button.
Image Reset
You can replace all image settings with the factory default
values.
Screen Adjustment
Coarse 0
Fine 
Position 
Image Reset 
tV
Move Enter Return
Position tV
Move Enter Return
Picture
Mode : Standard 
backlight 
Contrast 9
brightness 
Sharpness 0
Auto Adjustment 
Screen Adjustment 
Detailed Settings 
Picture Options 
Reset : OK 
tV
Move Enter Return
Screen Adjustment
Coarse 0
Fine 
Position 
Image Reset 
tV
Move Enter Return
Auto Adjustment in progress
Please wait.
Anynet+ (hDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep timer : Off
SRS tS Xt : Off
Energy Saving : Off
PIP
Auto Adjustment
Move Enter Exit
tools
BN68-01465A-Eng-0310.indd 29 2008-03-17 �� 4:43:43