Samsung LE23R81B - Manual (Page 13)

English - 11
Storing Channels manually
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
the programme number of each stored channel which you wish to identify.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the EntEr button.
. Press the ▲ or ▼ button to select "Manual Store", then press the EntEr button.
3. Press the EntEr button to select "Programme".
. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the EntEr button.
You can also set a programme number by pressing number buttons on the remote control.
. Press the ▲ or ▼ button to select "Colour System", then press the EntEr button.
. Select the colour standard required by pressing the ▲ or ▼ button then, press the EntEr button.
. Press the ▲ or ▼ button to select "Sound System", then press the EntEr button.
. Select the sound standard required by pressing the ▲ or ▼ button, then press the EntEr button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".
Press the EntEr button. Select C (Air channel) or S (Cable channel) by pressing the ▲ or ▼
button. Press the  button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the EntEr button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the EntEr button. Search by pressing the ▲ or ▼ button and then press the EntEr button.
11. Press the ▲ or ▼ button to select "Store". Press the EntEr button to select "OK".
1. Repeat steps 3 to 11 for each channel to be stored.
BN68-01166G-03Eng-0518.indd 11 2007-05-21 �� 11:12:33