Replacing the dust bag, For cloth filter bag, Usage of floor nozzle – Samsung VC-5916V User Manual

Page 15: Maintenance or replacement of the filters

Advertising
background image

MAINTENANCE OR REPLACEMENT OF THE FILTERS

SECONDARY FILTER

SECONDARY FILTER

REPLACING THE DUST BAG

INLET FILTER

To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust
compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may
result. After cleaning the secondary filter attach it in place.

1) To open the dust cover of the dust bag com-

partment, press the clamper upwards.(The
clamper is located at the front of the dust cover)

2) Remove the dust bag from the cleaner.

3) After removing the used dust bag, insert the

cardboard bag collar of the new dust bag into
its original position.

4) Press the dust cover down gently until the

clamper relocks.

FOR CLOTH FILTER BAG

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

6

OUTLET FILTER

NOTE:

The filters must be completely dried before being replaced in the dust compartment.

1) Open the grille part, separate the

exhausted filter.

2) Reassemble it after cleaning or replacing

the filter in the reverse order.

DJ68-00068V(EN)-0.9 7/27/07 3:24 PM Page 7

Advertising
This manual is related to the following products: