Samsung NV30CH0Q0B - Manual (Page 95)

82 Users Manual
Wired LAN Related
Q1 <Wake On LAN> function
A <Wake On LAN> is a function that activates the system in rest mode when a
signal (such as ping or magic packet commands) arrives from network (wired
LAN).
To use <Wake On LAN> function:
1. Click Start > My Computer > My Network Places > View network connections.
2. Click the right button on the touchpad over Local Area Connection, and select
Properties.
3. Click Configure, and select Power Management tab. Select ’Allow this device to
bring the computer out of standby’, then click OK. Restart the system.
If the system in rest mode is activated when there is no received signal, use the
system after disabling <Wake On LAN> function.
Connecting with wired LAN while also using wireless LAN may not execute
<Wake On LAN> function. To remedy this, configure wireless LAN to ’Disable’
to use <Wake On LAN> function.