Advantech MARS-3100R/S - Manual (Page 34)

MARS-3100R/S User Manual 20
2.9.5 LAN port
Figure 2.23 LAN port
2.10 Setting the Time and Date
Whenever the system timer is not matched with your location or time zone, please
reset the time and date by following step:
1. Click START > Control Panel, or START > Settings > Control panel
2. Double click the Date and Time Properties.
3. Select the correct day, month and year.
4. Click OK to save and exit.
2.11 Power Management
2.11.1 Suspend
To save battery power, or when swapping battery packs, put the MARS-3100R/S into
Suspend Mode. There are two suspend modes: Suspend-to-RAM (Standby mode)
and Suspend to HDD (Hibernation mode).
1. Suspend-to-RAM (Standby mode)
Suspend-to-RAM occurs when a system enters a low-power state. Information on
system configuration, open applications and active files are stored in the main mem-
ory. Most other system components are shut-off.
In this mode, although power consumption is very low, the battery may drain and
cause data loss. If the MARS-3100R/S is stored for durations longer than a few hours
or overnight, it is best simply to turn off the computer instead of using Suspend-to-
RAM mode.
Note! The Power LED blinks green. (See chapter 2.3.1)