Samsung SECR450ZRAMTR - Manual (Page 92)

89
Connecting to a Bluetooth Device
1. From the Registered List, highlight the device and press
or .
2. If you are unable to connect with the device a pop-up
appears in the display. Press the Yes soft key to retry.
Disconnecting from a Bluetooth Device
ᮣ From the Registered List, highlight the device and press
the Off soft key.
Managing Your Registered List
1. From the Registered List, highlight a device and press the
Options soft key. The following options appear in the
display:
• Remove Device — Deletes the device from the Registered List.
• Rename Device — Lets you change or replace the device name,
as needed.
• Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
2. Select the desired option to access it.
Bluetooth Settings
To access Bluetooth settings:
ᮣ From the Tools menu, select Bluetooth ➔ Bluetooth
Settings.
The following options appear in the display:
Enable/Disable
Selecting this option turns Bluetooth on or off. (For more
information, see “Turn Bluetooth On/Off” on page 87.)
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
Device Name
Shows the handset name. You may change this name. Enter the
text and press
or .
Supported Profiles
Lists and describes the Bluetooth profiles your phone supports.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
OK
OK