Connecting to a wlan, Connecting to a wlan and configuring network, Settings – Samsung EC-ST200FBPBCA User Manual
Page 104: Connecting to a wlan ………………… 103
Wireless network (ST200F/ST201F/ST205F only)
103
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [ ] to open AP setting options
•
When you select a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text". (p. 106)
•
When a login page appears, refer to "Using the login browser".
(p. 104)
•
When you select an unsecured AP, the camera will connect to
the WLAN.
•
If you select a WPS profile supported AP, select
WPS PIN,
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by selecting
WPS PBC on the
camera, and then selecting
WPS button on the AP device.
Connecting to a WLAN
1
On the Home screen, scroll to <Wi-Fi>.
2
Select
,
,
,
, or
.
3
Press [
], and then select Wi-Fi Setting.
•
In some modes, press [
] or follow the on-screen
instructions until the Wi-Fi Setting screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Wi-Fi Setting
Samsung 2
Samsung 1
Samsung 3
Samsung 4
Samsung 5
Back
Select
•
Select
WPS PBC to connect WPS AP.
•
Select
Refresh to refresh connectable APs.
•
Select
Add wireless network to add an AP manually.