Samsung HPM5027X-XAC - Manual (Page 6)

Remote Control Signal Receiver
Aim the remote control towards
this spot on the Monitor.
• SOURCE button
Press to display all of the available video sources
(ie., Video, S-Video, Component1, Component2,
PC ).
• MENU button
Displays the main on-screen menu.
• VOL(+,-) button
Press to increase or decrease the volume. Also used to
adjust items on the on-screen menu.
• SELECT(▲,▼) button
Used to adjust items on the on-screen menu.
• POWER button
Press to turn the PDP on and off.
Swivel Stand
This stand turns left, right up
to 25 degrees respectively so
that you can adjust the angle
while viewing.
Front Panel
11
Your New Plasma Display Panel
10
Rear Panel
ΠExternal Speaker Out jacks
Connect external speakers.
´ RGB Input 1 jack (15pin)
Connect to the video output jack on your PC.
ˇ RGB Input 2/Component Video Input jacks
(H/V/R/G/B, Y/P b /P r )
RGB input2/Component video input jacks are
BNC connectors.
¨ Video Input jack
Connect a video signal from external sources
like VCRs or DVD players.
ˆ S-Video Input jack
Connect a S-Video signal from an S-VHS VCRs
or DVD players.
Ø Audio Input (Video/Component/PC) jacks
Connect a audio signal from external sources
like VCRs, PC or DVD players.
∏ RS-232C Input jack
Connect the input jack on RS-232C to your
PC.
” Power Input jack
Connect the included power cord.
Speakers
Checking Parts
Remote Control/
AAA Batteries
Owner’s
Instructions
S-Video Cable PC Cable
Power Cord Ferrite Cores (7EA)
Video/Audio
Cable