Samsung EV-NX2000BABUS - Manual (Page 180)

179
Appendix >
Maintaining the camera
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage.
Prevent batteries from making contact with metal objects, as this can
create a connection between the + and – terminals of your battery and
lead to temporary or permanent battery damage and may cause a fire or
electric shock.
Notes about charging the battery
• If the status lamp is off, make sure that the battery is inserted correctly.
• If the camera is on while charging, the battery may not fully charge. Turn
off the camera before charging the battery.
• Do not use your camera when you are charging the battery. This may
cause a fire or electric shock.
• Do not pull the power supply cable to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.
• Let the battery charge for at least 10 minutes before turning on the
camera.
• If you connect the camera to an external power source when the battery
is depleted, using high energy-consuming functions will cause the
camera to turn off. To use the camera normally, recharge the battery.
• If you reconnect the power cable when the battery is fully charged, the
status lamp turns on for approximately 30 minutes.
• Using the flash or recording videos depletes the battery quickly. Charge
the battery until the red status lamp turns off.
• If the status lamp blinks in red, reconnect the cable, or remove the
battery and insert it again.
• If you charge the battery when the cable is overheated or the
temperature is too high, the status lamp may blink in red. Charging will
start when the battery cools down.
• Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so may
damage the cable.