Samsung SM-332BRNS - Manual (Page 7)

ENGLISH
13 12
Solving Recording Problems
If you have any problems recording via your COMBO drive,
follow the appropriate instructions below for the source that you are using.
◆ Hard Drive
1 Check whether the source file is corrupted.
◆ Network Drive
1 Copy the network drive contents to the hard disk and then from the hard disk
to the COMBO drive.
Note
The COMBO Drive provide a high speed rewriting Disc recording function (CD-RW 10X).
To rewrite at a high speed, use the disc which High Speed is printed on.
HS-RW : supporting 4X, 10X
General-RW : supporting 2X, 4X
◆ CD-ROM Drive
1 Clean the source CD, if necessary.
2 Create an image file and then copy the image file to the COMBO drive.
4 If the transfer speed of the CD-ROM drive is slower than the record speed,
reduce the record speed.
3 Check the CD-ROM drive record speed.
There are two recording methods :
Low-speed (file by file)
High-speed (transfer of an image file from the hard disk)
2 Optimize the hard disk by using the Windows defragmenter feature:
START / PROGRAMS / ACCESSORIES / SYSTEM TOOLS / DISC DEFRAGMENTER
3 Decompress the hard disk if it is compressed.
4 Make sure that the space available on the hard disk is at least twice the
size of the largest file to be recorded on the disc.
5 If you wish to record more than 1000 small files:
First create an image file and copy the image file to the disc.
Choose the low record speed
Compress small files and then record them