Powersaver, Preset timing modes – Samsung KS17CNKUHQ-XAZ User Manual

Page 101

Advertising
background image

Power Supply

AC90~264VAC,50/60Hz

Power Consumption

72W (nominal)

Dimensions (WxDxH) / Weight

401 x 414 x 378 mm / 15.8 X 16.3 X 14.9 inch (with Basic Stand)/ 13.8kg

Environmental considerations

Operating

Temperature 32°F ~ 104°F(0°C ~ 40°C)

Humidity 10% ~ 80%, non-condensing

Storage

Temperature -4°F ~113°F (-20°C ~ 45°C)

Humidity 5% ~ 95%, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,

monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Note: Design and specifications are subject to change without prior notice.


PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy

by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use a software utility installed on your computer to set up this feature.

State

Normal Operation

Power-off mode

Power Indicator

Green

Green, Blinking

Power Consumption

72W (nominal)

Less than 1W

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.

Advertising
This manual is related to the following products: