Samsung DVD-VR300-XAX - Manual (Page 33)

English - 33
S
ystem Setup
DVD-VIDEO
Add/Delete Channel.
Press Enter to move the cursor to select Add, then
press
❿ if you want to select Delete. Press ENTER
to confirm your selection.
6
RF Output Channel
When you connect the DVD Recorder-VCR to TV with RF
Antenna Cable, follow the steps below to set the
RF output channel.
Open “MENU”
With the DVD in Stop or Play mode, press the
MENU button.
1
Select “Setup”
Using the ❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2
Select “Channel Set”
Using the ❷ buttons, move the selection bar to
“Channel Set,” then press ENTER to select.
3
RF output Channel
Select “RF Output Channel”
Move the selection bar to “RF output Channel”,
then press right to change.
4
Change “RF Output CH”
Select channel 3 or 4 using the ❷ button.
Then press ENTER to change.
5
Change “TV Channel”
A message will appear on your TV. When the mes-
sage disappears, change your TV to channel 3 or 4
to match the RF output channel of the player.
6