Samsung SGH-T749ZAATMB - Manual (Page 101)

Applications 98
7. Touch Alarm sound.
8. Touch the Alarm type drop-down menu and select one of the following alarm types:
• Melody: the phone rings using the ring melody selected in the Ring tone menu.
• Increasing melody: the melody volume increases.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone vibrates 3 times and then starts ringing.
• Vibration & melody: the phone vibrates and plays a melody.
• Vibration & increasing melody: the phone vibrates and the melody volume increases simultaneously.
9. Touch the Alarm tone field, then touch Music, Sounds or Voice list to choose the alarm
sound and touch Select.
10. Touch and slide the Alarm volume bar to adjust the volume level for this alarm type (range is 1-7).
11. Touch Save.
12. Touch Save again to confirm your selections.
Tip: To stop the alarm when it rings, touch any key or touch and slide the Snooze soft key to snooze or stop.
Voice Recognition
Nuance is an advanced speech recognition software used to activate a wide variety of functions on your phone.
Nuance software automatically voice activates (up to 2,000 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name naturally to dial, and use your voice to look up contacts,
launch applications and navigate phone menus.
1. In Idle mode, touch Menu ➔ Applications ➔ Voice recognition.
2. At the voice prompt, say a command. The list of available commands is listed below.
Note: This list of voice commands is briefly displayed.