Samsung SEGT459LGATMB - Manual (Page 112)

109
Note: You are unable to connect to PC Studio when the Mass Storage option is selected.
Security
The Security feature enables you to restrict the use of your phone by others and to restrict outgoing calls. Various
codes and passwords are used to protect the features of your phone.
ᮣ In Idle mode, press Menu ➔ Settings ➔ Phone settings ➔ Security and press the Select soft key or the key.
Lock phone
When the Lock phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password
each time the phone is switched on.
Once the correct password is entered, you can use the phone until you switch it off.
ᮣ In Idle mode, press Menu ➔ Settings ➔ Phone settings ➔ Lock phone and press the Select soft key or the
key.
The following options are available:
– Disable: you are not asked to enter the phone password when you switch on the phone.
– Enable: you are required to enter the phone password when you switch on the phone.
Lock application
With this feature you can lock your applications which provide access to information such as call records,
phonebook, messages, images, and sounds. Once you lock the contents, you must enter the phone’s password to
access the associated menus.
1. In Idle mode, press Menu ➔ Settings ➔ Phone settings ➔ Security ➔ Lock application and press the Select
soft key or the key.
2. Highlight one of the applications or highlight All application and press the key. A check mark displays
next to the selection.
3. Press Save to save you selections and lock the selected applications.
t459.book Page 109 Tuesday, October 7, 2008 1:26 PM