Samsung SC-DC575-XAA - Manual (Page 51)

ENGLISH
51
Cutting Off Wind Noise (Wind Cut)
 The Wind Cut function works only in Camera Mode. page 26
 Use the Wind Cut when recording in windy places such as the beach or near buildings.
 The Wind Cut function minimizes wind noise or other noise while recording.
- When the Wind Cut is on, some low pitched tones are eliminated along with the sound of the wind.
1. Set the [Mode] switch to [DISC]. (SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [ (Camera)].
3. Press the [MENU] button.
4. Move the [Joystick] up or down to select <Record>, then press the [Joystick].
5. Move the [Joystick] up or down to select <Wind Cut>, then press the [Joystick].
6. To activate the Wind Cut function, move the [Joystick] up or down to select <On>,
then press the [Joystick].
7. To exit, press the [MENU] button.
 Wind Cut icon ( ) is displayed.
Note
Make sure Wind Cut is set to Off when you want the microphone to be as sensitive as
possible.
DVD Camcorder: Advanced Recording
4
Move OK Select MENU Exit
►SP
►Off
Camera Mode
►Record
Rec Mode
Wind Cut
6
Move OK Select MENU Exit
Off
On
Camera Mode
►Record
Rec Mode
Wind Cut
7
STBY
30 min
SP -RW
VR
0:00:00
16:9 Wide
AD68-01230A_US_R2.indb 51 2007-07-09 ¿АИД 1:02:30