Samsung SL-M2875FD-XAA - Manual (Page 63)

63 2. Menu Overview and Basic Setup
Basic scanning
• For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 243).
• Depending on models or options, some menus may not be supported
(see "Features by model" on page 7).
18
Basic Scanning
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
• if you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 249).
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
2 Select (scan) > Scan to PC > Local PC on the control panel.
Or select Scan to > Local PC on the control panel.
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in
Samsung Easy Printer Manager >
Switch to advanced mode
> Scan to PC Settings.
3 Select the application program you want and press OK.
Default setting is My Documents.
You can add or delete the folder where the scanned file is saved in
Samsung Easy Printer Manager >
Switch to advanced mode.
>
Scan to
PC Settings.
4 Select the option you want and press OK.
5 Scanning begins.
Scanned image is saved in computer’s C:\Users\users name\My
• Documents. The saved folder may differ, depending on your operating
system or the application you are using.