Step 1: connecting the antenna cable, Antenna + dvd recorder & vcr + tv : no cable box, Connections – Samsung DVD-VR330-XAA User Manual

Page 15

Advertising
background image

C

onnections

English - 15

Step 1: Connecting the Antenna Cable

There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below.

Antenna + DVD Recorder & VCR + TV : No Cable box

You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this

method if you watch channels without cable box.

If you are using an off-air antenna that has 300-
ohm twin flat leads, use an external antenna
connector (300-75 ohm adaptor : not supplied)
to connect the antenna to the DVD Recorder &
VCR.

Note

If you have two separate antennas (one VHF
and the other UHF), use a UHF/VHF combiner-
adaptor (available at most electronics shops) to
connect the antenna to the DVD Recorder &
VCR.

Note

00995A-VR330_XAA-Eng1 2006.2.27 3:6 PM Page 15

Advertising
This manual is related to the following products: