Samsung HPR5072X-XAA - Manual (Page 109)

109
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue screen automatically replaces
the noisy picture background. If you wish to continue viewing the poor picture, you must set the
“Blue Screen“ mode to “Off“.
1 Press the MENU button. Press the ▲ or ▼ button to select
“Picture”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “Blue Screen”, then
press the ENTER button.
3 Press the ▲ or ▼ button to select “On” or “Off”, then
press the ENTER button.
4 Press the MENU button to exit.
… More
Blue Screen : Off
Color Weakness : Off
PIP
Picture T V
Move Enter Return
… More
Blue Screen : Off
Color Weakness : Off
PIP
Picture T V
Move Enter Return
➤ ➤
Blue Screen is displayed when there is no signal from an external
device in the External Mode, regardless of the Blue Screen Setting.
Mode : Dynamic √
Size : 16:9 √
Digital NR : On √
DNIe Demo : Off √
My Color Control √
Film Mode : Off √
† More
Picture T V
Move Enter Return
Off
On
Off
On
BN68-00825G-X0Eng_104~115 4/22/05 9:28 AM Page 109