Samsung SCX-6555N-XBG - Manual (Page 11)

Introduction_ 11
System related tips
Starting and stopping SyncThru™ Admin 5 service
SyncThru™ Admin 5 starts automatically every time the computer you installed SyncThru™ Admin 5 onto boots up. If
you want to stop and start SyncThru™ Admin 5 manually, follow the steps below:
If the database is PostgreSQL, then there will be one more service (SyncThru 5 database) to stop/start.
To stop SyncThru™ Admin 5
1. From the Windows Start menu, click Control Panel > Administrative Tools > Services.
2. Select SyncThru 5.0 management application from the list
3. Click Stop.
To start SyncThru™ Admin 5
1. From the Windows Start menu, click Control Panel > Administrative Tools > Services.
2. Select SyncThru 5.0 management application from the list
3. Click Start.
Backing up and restoring the database
SyncThru™ Admin 5 provides database restoration and backing up functions if you are using PostgreSQL. Backup
and restore scripts are in the SyncThru™ Admin 5 install directory (usually, at C:\Program Files\Samsung Network
Printer Utilities\SyncThru Admin 5\postgresql).
Opening SyncThru™ Admin 5
There are two ways to open SyncThru™ Admin 5. You can open SyncThru™ Admin 5 by typing an address in a web
browser or from the Start menu (See the FAQ chapter of the SyncThru™ Admin 5 Guide for more information).
From a web browser
Type in one of the following addresses:
• http://server_name.domain:port_number
• http://ip_address:port_number
• “server_name.domain” is the hostname of the SyncThru™ Admin 5 host machine.
• “ip_address” is the IP address of the machine where SyncThru™ Admin 5 is installed.
• “port_number” is the port number that you entered during the installation.
From the Start menu
From the Start menu, click Program > Samsung Network Printer Utilities > SyncThru™ Admin 5 > SyncThru™
Admin 5.
OK vs. Apply button
After configuration, you have two choices to save the settings: OK and Apply buttons.
• OK : Clicking OK applies the changes and closes the window or moves to another page where the changes are
affected. Click this button when you are done making changes. It will commit changes to the datatbase.
• Apply : Clicking Apply applies the changes, but does not close the current window or move to another page. Click
this button when you want to do other jobs within the current page.
Other tips
Support site
• To download the SyncThru™ Admin 5 Job Accounting Plug-in, go to http://solution.samsungprinter.com.