Samsung HLP5063WX-XAC - Manual (Page 34)

Picture Control
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”
and “Tint” according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
Operation
English - 34
Customizing the Picture
1 Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
2 Press the ENTER button to
select “Mode”.
3 Press the … or † button to
select a particular item, then
press the ENTER button.
Press the œ or √ button to
increase or decrease the
value of a particular item.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory default picture settings.
4 Press the MENU button to
display the “Mode” menu.
Press the … or † button to
select “Reset”, then press the
ENTER button.
The previously adjusted
picture settings will be reset
to the factory defaults.
▲
Contrast
▼
90
Picture
Mode : Standard √
Color Tone : Warm1 √
Size : Wide √
Digital NR : Off √
DNIe : On √
My Color Control √
Film Mode : Off √
PIP √
Move Enter Return
Input
Picture
Sound
Channel
Setup
Mode
Mode : Standard √
Contrast 90
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup
NOTE
• “Tint” doesn’t operate
in PC, DVI, HDMI or
480p-Component or
higher modes.
Mode
Mode : Standard √
Contrast 90
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup