Samsung LS27D590PS-ZA - Manual (Page 62)

62
Setup and Reset
6
6 Setup and Reset
6.4 PC/AV Mode
Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie.

This function does not support Analog mode.

Supplied for the wide models only such as 16:9 or 16:10.

If the monitor (when set to HDMI) is in power saving mode or is displaying the message
Check Signal Cable , press the MENU button to display the On Screen Display(OSD).
You can select PC or AV .

The functions available on the monitor may vary depending on the model. Refer to the actual
product.
6.4.1 Configuring PC/AV Mode
1
When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2
Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3
Move to PC/AV Mode controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the HDMI 1 or HDMI 2 controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
5
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6
The selected option will be applied.
SETUP&RESET
Off
Acceleration
Auto
Stand-by
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
PC/AV Mode
HDMI 1
HDMI 2
PC
AV
Select the PC/AV mode
for the HDMI 1 source.
PC/AV Mode
HDMI 1
HDMI 2
PC
AV
Select the PC/AV mode
for the HDMI 2 source.