Samsung LS27D590PS-ZA - Manual (Page 63)

63
Setup and Reset
6
6 Setup and Reset
6.5 Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.5.1 Configuring Key Repeat Time
1
When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2
Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.

Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
SETUP&RESET
Off
Acceleration
Auto
Acceleration
1 sec
2 sec
No Repeat
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
Configure the
response rate of a
button when the button
is pressed.