Syncmaster 997df – Samsung LB17KSBB User Manual
Page 13
1.
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2-1.
Connecting to a computer
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
2-2.
Connecting to a new Macintosh
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-3.
Connecting to an old Macintosh
Connect your monitor to the Macintosh using the adapter for Macintosh (sold separately).
3.
When you use a BNC connector.
Connect the signal cable to the BNC signal port on the back of your monitor/computer.
4.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
Setup-For Multimedia model
SyncMaster 997DF