Samsung NP270E5E-K01US - Manual (Page 42)

40 41
Chapter 2.
Using the computer
Multi Card Slot
Using the card
1
Insert a memory card into the multi-card slot in the correct
direction.
2
The card drive appears. Click Open folder and view files.
If the window does not appear, click Start > Computer.
If a window asking to scan and change appears, click
Continue Without Scanning. This will proceed to Step 2
above.
3
You can save, move and delete data by double-clicking the
corresponding drive.
You can only use the card after formatting it.
The device name of the card drive may differ depending on
your computer model.
To remove a memory card
Remove the card as following depending on the model.
Push the card to eject it. Then, hold the tip of the card and pull it.
Alternatively, just hold the end of the card and remove it.