Using the tpm security device, Initializing the tpm chip, Optional) – Samsung NP270E5E-K01US User Manual

Page 63

Advertising
background image

62

Chapter 2.

Using the computer

Initializing the TPM chip

When you use the TPM function for the first time or you want to

register the user again, you have to initialize the TPM chip.

Initializing the TPM chip erases all authentication

information saved on the TPM chip. Any decision to

initialize must be taken carefully.
To initialize the TPM chip again while the TPM function is

in use, you have to decrypt any existing files and folders

encrypted by the TPM function first. Otherwise, you

will not be able to access the files and folders after re-

initialization.

1

Restart the computer.

When the Samsung logo screen appears, press the F2 key

repeatedly.

2

If the BIOS screen appears, select the Security > TPM

Configuration item and press Enter.

Phoenix SecureCore Tiano Setup

SysInfo

Supervisor Password

User Password

HDD Password

Set Supervisor Password

Set User Password

Set HDD Password

Password on Boot

Advanced

Security

Boot

Clear

Clear

Clear

[Enter]

[Enter]

[Enter]

[Enabled]

TPM Configuration

Exit

3

Set the TPM Support item to Enabled and set the Change

TPM Status to Clear.

Phoenix SecureCore Tiano Setup

TPM Configuration

TPM Support

Change TPM Status

Current TPM State

Security

[Enabled]
[

No Change

]

Disabled and Deactivated

No Change

Clear

Enable and Activate

Disable and Deactivate

4

Press the F10 key to save the changes.

Using the TPM Security Device

(Optional)

Advertising
This manual is related to the following products: