Samsung SH-S182M-CEBM - Manual (Page 31)

Select Languages
English
Category
SH-S182D(TS-H652D)
DVD Writer
DISC
Usable Discs
DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R (Dual), DVD-R (Dual), DVD-RAM
CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G)
CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD
CD-I, CD-I Bridge (Photo-CD, Video-CD),
Multisession CD (Photo-CD, CD-EXTRA, Portforio)
Disc Diameter 4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Support
Interface Port ATA/ATAPI (E-IDE)
PIO mode PIO Mode 4: 16.6MB/sec
DMA mode Ultra DMA Mode 2: 33.3MB/sec
ACCESS TIME (Random)
CD-ROM 110ms (Random)
DVD-ROM 130ms (Random)
Data Transfer Speed
(Max)
Media Type Write Read
DVD+R CAV 18X(24.3MB/sec) CAV 12X (16.2MB/sec)
DVD+RW Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec)
DVD+R DUAL Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec)
DVD-R DUAL Z-CLV 4X (5.4MB/sec) CAV 8X (10.8MB/sec)
DVD-R CAV 18X(24.3MB/sec) CAV 12X (16.2MB/sec)
DVD-RW Z-CLV 6X (8.1MB/sec) CAV 8X (10.8MB/sec)
DVD-ROM(Single) - CAV 16X (21.6MB/sec)
DVD-ROM(Dual) - CAV 8X (10.8MB/sec)
DVD+RAM CAV 12X(16.2MB/sec) CAV 12X(16.2MB/sec)
CD-ROM - CAV 48X(7.2MB/s)
CD-R PCAV 48X (7.2MB/sec) CAV 40X (6.0MB/sec)
US-RW PCAV 32X (4.8MB/sec) CAV 40X (6.0MB/sec)
HS-RW CLV 10X (1.5MB/sec) CAV 40X (6.0MB/sec)
CD-RW CLV 4X (0.6MB/sec) CAV 40X (6.0MB/sec)
Buffer Memory 2MB
Drive Installation Horizontal / Vertical
Operating Environment
Temperature 41°F ~ 122°F (5°C ~ 45°C)
Humidity 5%~80%(RH)
Size(Width x Height x Length) 5.34 X 1.65 X 7.24 Inch (148.2 X 42 X 184mm)
Weight 760g
Note
Does not support DVD-R for Authoring.
Cannot playback or record on both sides of a two-sided disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Severe vibration or external impact may decrease the quality of printed images.
Please firmly place the product onto the PC before use.
In case of disk identification error message, thoroughly clean the surface of the disk
where the label is presented and then start printing.
The quality of the printed image cannot be ensured if printing an image on the area
which is already used for printing.
For more information on the writing and duplicating the Lightscribe disk label,
install Nero software and refer to the HELP section.
Fcc information to the user
This equipment has been tested and found to comply with the limits for a class B digital device. pursuant
to part 15 of the FCC rules.