Samsung LNT2353HX-XAA - Manual (Page 26)

English - 
using automatic picture Settings
Your TV has Three automatic picture settings ("Dynamic”, “Standard”, “Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
. Press the mEnu button to display the menu.
Press the EntEr button, to select “Picture”.
. Press the EntEr button to select “Mode”.
Press the EntEr button again.
Press the ▲ or ▼ buttons to select the “Dynamic”, “Standard”, “Movie” picture
setting. Press the EntEr button.
 Choose dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for the standard factory settings.
 Choose movie for a natural Image without picture enhancements.
. Press the ▲ or ▼ buttons to select “Contrast”, “Brightness”, “Sharpness”,
"Color”, or “Tint(G/R)”, then press the EntEr button.
. Press the ◄ or ► buttons to decrease or increase the value of a particular item.
For example, if you select “Contrast”, pressing the ► button increases it.
Press the
ExIt button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
OSD will be also adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
picture Control
00
▲
Contrast
▼
move adjust return
move Enter return
mode : dynamic ►
Contrast 00
brightness 5
Sharpness 5
Color 55
tint G 50 r 50
backlight 0
▼More
picture tV
move Enter return
picture tV
mode : dynamic
Contrast 00
brightness 50
Sharpness 5
Color 55
tint G 50 r 50
backlight 0
▼More
dynamic
Standard
movie
move Enter return
mode : dynamic ►
Contrast 00
brightness 50
Sharpness 5
Color 55
tint G 50 r 50
backlight 0
▼More
picture tV
Press the p.modE button on the remote control
repeatedly to select the desired picture mode.
BN68-01156B-02Eng-0329.indd 24 2007-03-29 �� 7:58:49