Connecting audio from external components, Hdmi function, Con’t) – Samsung HT-X75-XAA User Manual
Page 12: Using anynet+(hdmi-cec), Aux1 : connecting an mp3 player or ipod
ENG
CONNECTIONS
23
22
HDMI Function
(Con’t)
Connecting Audio from External Components
1
Connect the main unit of the Home Theater to a Samsung TV with
an HDMI cable. (See page 19)
2
Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
■
You can operate the Home Theater by using the TV remote control.
(Available TV buttons :
, , , ,
,
and
,
buttons,
~
button)
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
■
<Receiver : On> : You can listen to audio through the Home Theater.
■
<Receiver : Off> : You can listen to audio through the TV.
Select <THEATER to connector> and set the option of each items below.
■
<View TV> : If Anynet+(HDMI-CEC) set to on and you select View TV, the Home Theater will
automatically switch to DIGITAL IN.
■
<THEATER Menu> : You can access the Home Theater menu.
■
<THEATER Operation> : The Home Theater disc playback information will be displayed.
■
<Receiver : On> : You can listen to audio through the Home Theater.
■
<Receiver : Off> : You can listen to audio through the TV.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used
by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
• When selecting View TV, you must have a digital optical cable connected from
the TV to the Home Theater to listen to the TV sound through the Home Theater.
• If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
• Anynet+ (HDMI-CEC) will only work while in the DVDmode.
If you select TV
If you select the THEATER
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on
your Samsung TV's remote control.
AUX1 : Front Panel (MP3 player)
AUX1 : Front Panel (iPod only)
Audio Cable
(supplied)
Audio Cable
(not supplied)
AUX1 : Connecting an MP3 player or iPod
You can listen to the audio from an MP3 player/iPod through the main unit.
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of an MP3 player or iPod.
2
Press the AUX button on the remote control to select <AUX1> input.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD
➝
DIGITAL IN
➝
AUX 1
➝
AUX 2
➝
HDMI IN
➝
USB
➝
FM
➝
XM.
• When the unit is powered on and you connect an iPod MP3 player, the unit will charge your iPod's battery.
"iPod is registered trade mark of Apple Computer, Inc"
MOVE
ENTER
EXIT