Xm display mode, Checking the xm signal strength, Xm search mode – Samsung HT-X75-XAA User Manual

Page 32: Xm satellite radio, Con’t)

Advertising
background image

ENG

63

62

XM Satellite Radio

(Con’t)

The XM features described here only operate when the optional XM antenna is connected to the main unit.

Press the XM DISPLAY button.

Each time the XM DISPLAY button is pressed, the mode changes as follows:

XM Display Mode

• When the Channel Name/Number is displayed :

• When the Channel Category is displayed :

• When the Artist Name/Song Title is displayed :

• When the Signal Strength is displayed :

• The front panel display can indicate up to 10 alphanumeric characters at once. If the

information contains more than 10 characters, the information scrolls from right to left.

• If the information contains a character that cannot be recognized by the unit, the character will

be displayed with an underbar < * >.

• To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID

number is required. Follow the procedure above to check your ID number, and then access the
website at “http://activate.xmradio.com” or call “1-800-XM-RADIO(1-800-967-2346)” with a
major credit card to sign up.

The XM features described here only operate when the optional XM antenna is connected to the main unit.

Press the XM SEARCH button.

Each time the XM SEARCH button is pressed, the mode changes as follows:

XM Search Mode

Checking the XM Signal Strength

Checking the Radio ID

Channel Search Mode :

Press the TUNING/CH (or

button on the main

unit) to move to the desired channel.

Category Search Mode :

Press the TUNING/CH (or

button on the main

unit) to select the channel within the selected category.

Preset Search Mode :

Press the TUNING/CH (or

button on the main

unit) to select the channel within the memorized
channels.

,

,

,

Press the XM DISPLAY button until <Signal> is displayed.

The display changes as shown below according to the receiving condition.

Press the Cursor

,

button (or

button on the main unit) to select channel <o>.

The Radio ID is displayed. The ID below is just an example.

Display Condition

GOOD

Signal strength is good

MARGINAL

Signal strength is marginal

WEAK

Signal strength is poor

NO

Loss of signal

CHANNEL NAME/NUMBER

CHANNEL CATEGORY

ARTIST NAME/SONG TITLE

SIGNAL STRENGTH

CHANNEL SEARCH

CATEGORY SEARCH

PRESET SEARCH

MISCELLANEOUS

Advertising
This manual is related to the following products: