Samsung DVD-VR300-XAA - Manual (Page 28)

28 - English
S
ystem Setup
Note
Note
Note
Digital Output
Setting Up the Audio
Options
Use the ❷ buttons to select the desired item.
Then press the RIGHT or ENTER button.
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using
the Digital Audio Output.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital out-
put only. Select DTS when connecting to
a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
5
Press the RETURN or ➛ button to return to the
previous menu. Press the MENU button to exit the
menu.
Be sure to select the correct Digital Output or no
audio will be heard.
When DTS soundtrack is played, sound is not out-
put from Analog Audio Output.
If you set the player menu, disc menu, audio and subtitle
language in advance, they will come up automatically every
time you watch a movie.
With the unit in Stop mode, press the MENU but-
ton on the remote. 1
Select Setup using ❷ buttons, then press the ❿
or ENTER button.
2
Select Audio using ❷ buttons, then press the ❿
or ENTER button.
Audio setup menu will be displayed.
3
Use ❷ buttons to select the desired sub menu
and press the ENTER or ❿ button.
4
PCM
Bitstream