Samsung DVD-VR300-XAA - Manual (Page 60)

R
ecording
60 - English
Recording the current
channel you are watching
DVD-RAM DVD-RW DVD-R
1. Check the antenna cable is connected.
2. Check the remaining time of disc.
DVD-RAM/DVD-RW discs should be formatted in advance
before beginning recording. Most new discs are sold unfor-
matted. Make sure to format your unformatted discs before
recording.
Press the OPEN/CLOSE button and place a record-
able disc on the disc tray. 1
Press the CHANNEL / button to select
the channel you want to record. 2
Press the REC Speed button on remote control, to
select the recording speed (quality).
• XP(High, approx. 1 hour) SP(Standard, approx.
2 hours) LP(Low, approx. 4 hours) EP(Extended
Play, approx 6 hours)
3
RAM
Press the REC button.
• / is displayed on the screen and recording
begins.
4
Press the STOP button to stop or finish a recording
in progress.
• The message “Updating the information of disc.
Please wait for a moment”.
5
• Press the REC PAUSE button to pause a recording in
progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the CH /
buttons while recording pauses.
Pausing / Resuming
You can’t change the recording mode and channel
during recording.
Recording will stop automatically if there is not
enough space for recording.
Up to 99 titles can be recorded onto a disc.
If the power interrupted due to power failure or
other reasons, the title being recorded will not be
saved onto the disc.
Recording will stop automatically if a copy protect-
ed image is input.
Do not use DVD-R authoring discs with this unit.
Note