2 up or 4 up copying – Samsung SCX-4720F-XIP User Manual
Page 123
C
OPYING
5.12
3
Press Special Copy or the scroll button ( or ) until “2
sides in 1pg” displays on the bottom line.
4
Press Enter to make your selection.
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
6
Press Start to begin copying.
Your machine begins scanning the front side.
7
When “Set Backside” displays on the bottom line, open the
document cover and flip the document over. Close the
cover.
N
OTE
: If you press the Stop/Clear button or if no buttons are
pressed for approximately 30 seconds, the machine cancels the
copy job and returns to Standby mode.
8
Press Start again.
2 Up or 4 Up Copying
This copy feature is available only when you load documents in
the ADF.
1
Load the documents to be copied in the ADF.
2
Press Special Copy.
3
Press Special Copy or the scroll button ( or ) until “2
UP” or “4 UP” displays on the bottom line.
4
Press Enter to make your selection.
5
If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
N
OTE
: You cannot adjust the copy size using the Reduce/
Enlarge button for making a 2 or 4 Up copy.
6
Press Start to begin copying.
1
2
3
4
1
2
2-up copying
4-up copying